Start » Begagnat och Demo » Demo-Ex » 6-kanals PRO DJ mixer med 2 ljudkort och VCA-fader

5 995:-

SEK

4 796:- exkl. moms

Delbetala från 232:-/månad eller ett år räntefritt

Fraktkostnad : 99:-

Translate

Produktinformation

Artikel nr : CITcdm104
Kortnamn : 6-kanals PRO DJ mixer med 2 ljudkort och VCA-faders. Studioljud 5Hz-50.000Hz, distorsion under 0.01%. 39 in/utgångar. 2 USB spela in, spela upp. Punch-knappar, in/utgångar för effekter, cue-mix, adres
Vikt : 6.00 kg
Volym : 0.01 m3

Läs mer på tillverkarens hemsida
Fabrikat : Specifikationer

6-kanals PRO DJ mixer med 2 ljudkort och VCA-faders. Studioljud 5Hz-50.000Hz, distorsion under 0.01%. 39 in/utgångar. 2 USB spela in, spela upp. Punch-knappar, effekt send/returns, cue-mix, adresserbar X-fader, mik-ingångar med musikstyrning, 3-bands EQ på alla kanaler, 3.5mm Aux in på fronten.

Europas Lägsta Pris

Ord. pris 5 995:-

Ditt pris (-50%) 2998:-

2 398:- exkl. moms

Delbetala från 135:-/månad eller ett år räntefritt

6-kanals PRO-mixer
3-bands EQ på varje kanal med +12 dB boost och -26 dB cut/kill
2 mik kanaler med 3-bands EQ, panorering och gain samt balanserade XLR-ingångar
2 extra mik-ingångar tele
Mik override för DJ och radiosändning, reglage för känslighet och djup
Effekt send och return för effekter i stereo
2 balanserade XLR-utgångar
Adresserbar crossfader
Railglide faders genomgående av mycket hög kvalitet
Punch-in knappar, klipp in ljud från andra kanalen
Uttag för mixerlampa 12V BNC
Boothutgång med egen volym, för DJ-monitorer eller ljud i annat rum
Masterutgångar med balans och volymreglage
Mix-reglage X-fade för hörlur, valbar cue
2 VU-mätare 3-färgs 22 LED
Eq Bas ±12 dB, -26dB @ 100 Hz
Eq Mellanregister ±13dB, -26 dB @ 800Hz
Eq Diskant +12 dB, -12 dB @ 9kHz
20-20.000Hz +-0.5dB
5-50.000Hz +-3dB
483 x 266 x 80 mm 6HE
Hela bakpanelen med alla kontakter är FLYTTBAR - kan monteras på undersidan!

TOPP-BETYG I DJ-GEARS TEST:

Such a self-made mixer at least that is what I suppose because after some quick research, I haven’t found anything similar elsewhere.

In short, it turns out that I can connect virtually everything I have on my shelf for reviewing to and at the end, there are still inputs left.

When we inserted the screwdriver into the mixer to unmount the plate that covers the faders, we noticed that the faders are neatly fitted on a sub chassis and can be replaced easily by the end user. Citronic has adopted the same method that we met before in other OEM mixers: a pin/print connector where the fader connector is placed on the pins on the main PCB. It is in itself a good thing when the user can replace the faders himself. However I am not a great fan of pin/print connectors although it is always better that soldering them directly to the PCB. I prefer to have a cable that connects the fader to the main PCB as this is the only reliable method over the long term.

The faders that are used are well known to us.

One particularity that I have never met before and that I find extremely useful. Normally the connectors for equipment are located on the rear panel of a unit. Up to there, nothing different. All those who have already worked with a 19" set in a flight case know that CD players are often mounted below the mixer because the connectors on top of the mixer make it impossible to install the control unit of a CD player above the mixer which is most irritating because personally I would prefer to have my CD players (if I have to work with a dual CD player) on top of the mixer.

Gets around the problem as it allows making the connections behind or below the mixer. The problem is solved and you save 1U in a flight case…

Very handy if you want to optimize the use of the mixer and mount the control unit of a CD player or MIDI controller firmly against the top panel of the mixer.

Conclusion

We can fill another 2 pages about the buttons and other bits and pieces but this is of no interest. In short, it is a no nonsense 19" mixer that offers good quality.

No knickknacks with effects this time, just a straightforward unit that accepts a whole lot of equipment to be connected to 1 mixer. The rear panel whose connectors can be mounted also on the bottom panel of the mixer is really smart. The faders are user replaceable and can be changed easily and quickly without much co

Improved new model. Some great features have been added but the real work has been done on improving the quality and performance, making it one of the best value for money mixers on the market. 2 Dedicated balanced Mic channels with 3-band EQ 4 channel, 19", 6U, 17 Input DJ Mixer Fully featured Mic override facility for use with radio Mics 2 Auxiliary Mics on channels 1 and 2 2 Phono inputs switchable to line level inputs 6 CD/Line inputs plus 2 switchable 3.5mm Aux input on top panel for external sound sources such as an MP3 player 2 USB input/outputs on channels 3 and 4 Fully assignable VCA crossfader Citronic punch buttons Hotswap channel faders allow changing in seconds Individual gain control per channel 3-Band EQ Fully assignable send and return Blanking plate to add DSP or Sound Effects module 10-Bar LED monitor display 12V BNC light socket Booth output Balanced XLR and unbalanced phono outputs Back panel can be positioned on rear or underside of mixer for install